How to blacken taillights: a hot topic and practical guide on the Internet
Recently, "blackened taillights" in car modification have become a hot topic, especially among young car owners. This article will combine the hot content of the entire network in the past 10 days to provide you with structured data and detailed operation guides.
1. Top 5 popular car modification topics on the Internet in the past 10 days
| Ranking | Topic keywords | peak search volume | Main discussion platform |
|---|---|---|---|
| 1 | Blackened taillights | 128,000 | Douyin, Autohome |
| 2 | New energy vehicle modification | 93,000 | Weibo, understand car emperor |
| 3 | Wheel hub spray painting | 76,000 | Xiaohongshu, Bilibili |
| 4 | Car Fragrance DIY | 52,000 | Zhihu, Taobao |
| 5 | Invisible car cover | 49,000 | WeChat community, Kuaishou |
2. Comparison of three mainstream methods of blackening taillights
| method | Material cost | Operation difficulty | persistence | legitimacy |
|---|---|---|---|---|
| blackened film | 50-200 yuan | ★☆☆☆☆ | 2-3 years | Filing required |
| Spray paint treatment | 300-800 yuan | ★★★☆☆ | More than 5 years | Banned in some cities |
| Replacement assembly | 2000-5000 yuan | ★☆☆☆☆ | permanent | legal |
3. Blackened Film DIY Operation Steps
1.Preparation:Purchase special taillight blackening film (it is recommended to choose a model with a light transmittance of >30%), a heat gun, a scraper, a utility knife, and a cleaner.
2.Clean the surface:Use alcohol to thoroughly remove oil and dust from the surface of the taillight to ensure that no particles remain.
3.Cutting film:Leave a 5cm margin for cutting according to the shape of the taillight, and pay attention to distinguish the direction of the left and right light films.
4.Heated fit:Use a hot air gun to evenly heat the film surface until it is slightly transparent (about 80°C), and gradually smooth it from the center to the edge.
5.Trimming process:After cooling, cut accurately along the edge of the lampshade, and finally use a heat gun to treat the seams.
4. Precautions and regulatory requirements
1.Safety red line:According to the "Technical Conditions for Safety in Motor Vehicle Operation" (GB7258), the light transmittance of taillights shall not be less than 30% of the standard value.
2.Filing process:Within 10 days after completing the modification, you must bring your vehicle registration certificate and ID card to the vehicle management office to register the change.
3.Insurance Impact:Some insurance companies have the right to refuse compensation for accidents caused by illegal modifications. It is recommended to consult the insurance company in advance.
5. Feedback from car owners’ measured data
| car model | Modification method | Transmittance change | Visible distance at night |
|---|---|---|---|
| Honda Civic | light black film | 42%→35% | 150m→120m |
| Tesla Model 3 | matte spray paint | 45%→28% | 180m→90m |
| Volkswagen Golf | Original blackened parts | 50%→40% | Keep 200m |
6. Expert advice
1. Prioritize the reversible blackened film solution to avoid repeated consumption caused by failing annual inspections.
2. The rear fog lamp must maintain its original red color. According to Article 16 of the Road Traffic Safety Law, it is illegal to change the color of the fog lamp without authorization.
3. It is recommended to perform construction in a professional modification shop. Improper DIY may cause bubbles in the film, edge warping and other problems.
Through the above structured data and detailed guide, I believe you have a comprehensive understanding of the key points of blackened tail lights. Before modification, be sure to weigh the visual effects and driving safety, and show your individual style in a legal and legal manner.
check the details
check the details
en
